TENNSMITH, INC. (“Manufacturer”) warrants, commencing with the date of shipment to first end-user (“Customer”) and for a period of thirty-six (36) months thereafter, all machinery and parts manufactured by Manufacturer to be free of defects in workmanship and material. This warranty remains in force for the above time period only if all of Manufacturer’s operational procedures are followed and recommended maintenance is performed. If, within such warranty period, any machinery or parts manufactured by Manufacturer shall be proved to Manufacturer’s satisfaction to be defective, such machinery or parts shall be repaired or replaced, at Manufacturer’s option. All warranty claims are made F.O.B Manufacturer’s plant, providing such machinery or parts are returned freight prepaid to Manufacturer’s plant or designated service center for Manufacturer’s inspection. All failed parts or components must be returned to Manufacturer prepaid for inspection before credit will be issued for new parts or components. Manufacturer’s obligation hereunder shall be confined to such repair or replacement and does not include any charges, direct or indirect, for removing or replacing defective machinery or parts.
No warranty shall apply to machinery, or parts or accessories, which have been furnished, repaired, or altered by others so as, in Manufacturer’s judgment, to affect the same adversely or which shall have been subject to negligence, accident or improper care, installation, maintenance, storage, or other than normal use or service, during or after shipment.
No warranty shall apply to the cost of repairs made or attempted outside of Manufacturer’s plant or designated service center without Manufacturer’s authorization. No warranty shall apply with respect to machinery or part not manufactured by Manufacturer, including but not limited to electrical components, if such machinery or part is subject to warranty by the manufacturer of such machinery or part. No warranty claims by Customer will be honored with respect to any machinery or part from which the name and date plate has been removed or is otherwise no longer located or exhibited on such machinery or part.
THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. MANUFACTURER SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES WHATSOEVER WITH RESPECT TO MACHINERY, PARTS, ACCESSORIES, OR SERVICES MANUFACTURED OR FURNISHED BY IT OR ANY UNDERTAKINGS, ACTS, OR OMISSIONS RELATING THERETO. UNDER NO CIRCUMSTANCES SHALL MANUFACTURER BE LIABLE FOR ANY CONSEQUENTIAL OR OTHER DAMAGES, EXPENSES, LOSSES, OR DELAYS HOWSOEVER CAUSED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THEDESCRIPTION ON THE FACE HEREOF.
TENNSMITH power machinery features high quality brand name electrical components manufactured in the USA. Replacement components are generally readily available over the counter at electrical supply houses in any industrial market area. Our equipment features transformed control circuits for operator safety. All TENNSMITH-made machinery is manufactured to conform with ANSI Standards.
Every effort is made for prompt fulfillment of parts orders. With the entire manufacturing process occurring at our facilities in Middle Tennessee, you can rest assured that parts for your TENNSMITH machinery are, and will continue to be, readily available. Parts may be ordered trough your local TENNSMITH distributor. If further assistance is needed, feel free to contact the factory. To facilitate processing of your order, please specify the model and serial number of your machine, and include the part number you require. Additional parts manuals are available upon request.
Operating capacities of TENNSMITH machinery are rated for AISI 1020 steel, 80,000 psi tensile, 44,000 psi yields, unless otherwise specified.