TENNSMITH's slip rolls combine precision-turned, ground and polished high carbon steel rolls with heavy-duty, cast iron end frames and a welded steel base to make an accurate and durable forming tool.

Convenient operating features include large roll adjusting screws, scales for speeding repeat set-up, and a front-mounted handle to lift the upper roll for material removal. Wire grooves are standard.








 





slip rolls sr24 sr36 sr42 sr48
Capacity, mild steel 20 gauge/1.0 mm 22 gauge/.75 mm 24 gauge/0.6 mm 16 gauge/1.6 mm
maximum forming length 24 in/610 mm 36 in/914 mm 42 in/1067 mm 49 in/1244 mm
Diameter of rolls 2 in/51 mm 2 in/51 mm 2 in/51 mm 3 in/76 mm
minimum forming radium 1 in/25 mm 1 in/25 mm 1 in/25 mm 1-1/2 in/38.1 mm
wire grooves 3/16, 1/4, 5/16 in
5, 6.5, 8 mm		 3/16, 1/4, 5/16 in
5, 6.5, 8 mm		 3/16, 1/4, 5/16 in
5, 6.5, 8 mm		 3/8, 1/2, 5/8 in
9.5, 12.7, 15.8 mm
Gearing ratio n/a n/a n/a 4 : 1
Roll speed n/a n/a n/a n/a
motor-230/640v, 3-phase, 60Hz n/a n/a n/a n/a
Dimensions LxWxH             -             -             -             -
Shipping weight 190 lbs/86 kg 250 lbs/113 kg 270 lbs /122 kg 775 lbs/351.5 lbs