F6 Series
  • F6-48-12
  • F6-72-12
  • F6-96-12
  • F6-120-14

Box & Pan Hand Brakes

TENNSMITH’s F6 Series box and pan brakes were designed to provide heavy-duty forming capability, along with the flexibility of removable 6-inch box depth fingers. Ample clamping and easy-to-use nose bar adjustments allow for a quick-setting bend radius. Welded steel plate construction and heavy truss rods and braces provide strength and rigidity.

Other adjustment features include:

  • Leveling screws and lock nuts on the pedestals
  • Jack screws and tensioner bolts on the apron
  • Truss rods on the apron, base and upper beam
  • Fully adjustable counter balances to facilitate the
    bending process
  • Removable apron angle and insert permit 1/4-inch
    reverse bends in lighter material


Request a Quote
Box & Pan Hand Brakes F6-48-12 F6-72-12 F6-96-12 F6-120-14
Capacity, mild steel 12 gauge/2.7 mm 12 gauge/2.7 mm 12 gauge/2.7 mm 14 gauge/2.0 mm
Capacity, stainless steel 16 gauge/1.6 mm 16 gauge/1.6 mm 16 gauge/1.6 mm 18 gauge/1.0 mm
Bending length 48 in./1220 mm 72 in./1829 mm 96 in./2464 mm 120 in./3048 mm
Maximum Iift of beam 1-1/2 in./38.1 mm 2-1/4 in./57 mm 2-1/4 in./57 mm 2-1/4 in./57 mm
Front to rear beam adjustment 1/2 in./12.7 mm 1/2 in./12.7 mm 1/2 in./12.7 mm 1/2 in./12.7 mm
Maximum depth of box 6 in./152.4 mm 6 in./152.4 mm 6 in./152.4 mm 6 in./152.4 mm
Minimum reverse bend 1/4 in./6 mm 1/4 in./6 mm 1/4 in./6 mm 1/4 in./6 mm
Minimum flange in capacity material 1 in./25 mm 1 in./25 mm 1 in./25 mm 1 in./25 mm
Finger widths 3, 4 and 5 in.
76.3, 101.6 and 127 mm
3, 4 and 5 in.
76.3, 101.6 and 127 mm
3, 4 and 5 in.
76.3, 101.6 and 127 mm
3, 4 and 5 in.
76.3, 101.6 and 127 mm
Dimensions, counterweights in place, LxWxH 72 x 49 x 56 in.
1829 x 1245 x 1425 mm
110 x 53 x 60 in.
2794 x 1347 x 1524 mm
137 x 53 x 60 in.
3480 x 1347 x 1524 mm
161 x 53 x 60 in.
4090 x 1347 x 1524 mm
Shipping weight 1725 Ibs./783 kg 2825 Ibs./1282 kg 3250 lbs./1475 kg 3675 Ibs./1670 kg

Available options: Radius fingers; extension fingers (right and left extension fingers form inside corners with a return flange across the top on boxes, cabinets, etc.); open end fingers (provide triangular, square and rectangular tube forming abilities). Ask dealer for more details.

Site Designed & Maintained by: Colloredo & Associates